Standard Stainless Steel Reeds

SSREED

Standard Stainless Steel Reeds
Typically Ships In:
1 - 3 Days

Stainless Steel Reeds (which are rustproof) are stronger and more durable than carbon steel reeds.  If you are interested in any sizes not listed (we do not list them all), please call or check out our custom reed page.

In determining the length of a reed to buy, understand that the lengths we specify are the approximate weaving widths, not the actual length of the reed, which will be approximately 0.75 to 1.0 inch longer. Examine how your reed fits in your beater to determine if total length is critical (normally critical when, in addition to the top and bottom rails, there is some type of vertical support on each end of the beater that restricts total reed length).

Different looms handle this in different ways. You can determine your weaving width by measuring the inside of your harness. Don't order the wrong size reed. If in doubt, call us - 800-441-9665.

Note regarding height: all reeds are approximately 4.75" to 5" high and will fit most looms. Almost all beaters have adjustments for the bearer rails that allow different heights. If reed height is important for the design of your beater, call us first. We can help.

If you need a dent size other than what we list, we can accommodate any size and any dent - including metric and 1/2 dent sizes.

The measurements below are Weaving Widths - Remember to add @ 0.75" to 1" to determine the total width of the reed. 

Ashford  Looms 

Glimakra Looms

Harrisville Looms

  • Harrisville Model A/6 - 22" Reed
  • Harrisville Model 22/8 - 22" Reed
  • Harrisville Model T/6 - 36" Reed
  • Harrisville Model 36/8 - 36" Reed
  • Harrisville Model 45 - 45" Reed 

Leclerc Looms

**Dorothy prior to 1980 takes a 15" Reed

Louet Looms

Schacht Looms

***Schacht Table looms only have a maximum of 1/2" tolerance.  The total width of the reed can only be 3/8" wider than the weaving width.  Please call us at 800-441-9965 to order these reeds.

Please note that the color, style, and weight of the reeds may vary from reed to reed. If you need a specific style or color please contact the shop (800-441-9665) and we will do our best to accommodate your request.

Note: Items with a shipping length of 48” and longer are subject to a surcharge, regardless of the shipping method selected. (Fee is imposed by the shipping carriers.)

View More
$69.50 - $365.25
Description

Stainless Steel Reeds (which are rustproof) are stronger and more durable than carbon steel reeds.  If you are interested in any sizes not listed (we do not list them all), please call or check out our custom reed page.

In determining the length of a reed to buy, understand that the lengths we specify are the approximate weaving widths, not the actual length of the reed, which will be approximately 0.75 to 1.0 inch longer. Examine how your reed fits in your beater to determine if total length is critical (normally critical when, in addition to the top and bottom rails, there is some type of vertical support on each end of the beater that restricts total reed length).

Different looms handle this in different ways. You can determine your weaving width by measuring the inside of your harness. Don't order the wrong size reed. If in doubt, call us - 800-441-9665.

Note regarding height: all reeds are approximately 4.75" to 5" high and will fit most looms. Almost all beaters have adjustments for the bearer rails that allow different heights. If reed height is important for the design of your beater, call us first. We can help.

If you need a dent size other than what we list, we can accommodate any size and any dent - including metric and 1/2 dent sizes.

The measurements below are Weaving Widths - Remember to add @ 0.75" to 1" to determine the total width of the reed. 

Ashford  Looms 

Glimakra Looms

Harrisville Looms

  • Harrisville Model A/6 - 22" Reed
  • Harrisville Model 22/8 - 22" Reed
  • Harrisville Model T/6 - 36" Reed
  • Harrisville Model 36/8 - 36" Reed
  • Harrisville Model 45 - 45" Reed 

Leclerc Looms

**Dorothy prior to 1980 takes a 15" Reed

Louet Looms

Schacht Looms

***Schacht Table looms only have a maximum of 1/2" tolerance.  The total width of the reed can only be 3/8" wider than the weaving width.  Please call us at 800-441-9965 to order these reeds.

Please note that the color, style, and weight of the reeds may vary from reed to reed. If you need a specific style or color please contact the shop (800-441-9665) and we will do our best to accommodate your request.

Note: Items with a shipping length of 48” and longer are subject to a surcharge, regardless of the shipping method selected. (Fee is imposed by the shipping carriers.)

Videos Hide Videos Show Videos

!