Glimakra Standard Floor Loom Sectional Warp Beam

xxx10977

Typically Ships In:
2 - 4 Weeks (Special Order Item)

The kit consists of 4 wooden beams with holes drilled for metal loops, that divide the beam into 1 inch (25 mm) or 2 inch sections. The beams are attached with screws directly into the regular warp beam and the metal loops are inserted into the holes.

In sectional warping, you wind and beam on at the same time. Sectional warping is especially convenient for long warps and very fine threads.

Sectional warping does require the use a tension box (sold separately). The Glimakra Tension Box has a shed maker, revolution counter, adjustable tension dowel to control the amount of tension, two reeds to control the width of the warp, and an extension to place the threads at the correct width on the beam. 

Note: Items with a shipping length of 48” and longer are subject to a surcharge, regardless of the shipping method selected. (Fee is imposed by the shipping carriers.) 

View More
$470.00 - $540.00
Adding to cart… The item has been added
Description

The kit consists of 4 wooden beams with holes drilled for metal loops, that divide the beam into 1 inch (25 mm) or 2 inch sections. The beams are attached with screws directly into the regular warp beam and the metal loops are inserted into the holes.

In sectional warping, you wind and beam on at the same time. Sectional warping is especially convenient for long warps and very fine threads.

Sectional warping does require the use a tension box (sold separately). The Glimakra Tension Box has a shed maker, revolution counter, adjustable tension dowel to control the amount of tension, two reeds to control the width of the warp, and an extension to place the threads at the correct width on the beam. 

Note: Items with a shipping length of 48” and longer are subject to a surcharge, regardless of the shipping method selected. (Fee is imposed by the shipping carriers.)