Kromski Minstrel Jumbo Flyer Kit

xxx11311

Typically Ships In:
1 - 3 Days

Extend the capabilities of your Kromski Minstrel wheel by adding a Jumbo Flyer Kit. You can quickly swap out your regular flyer for the jumbo unit (and back again). Here are the benefits: flyer with very large orifice 0.70 inch opening for heavy spinning and plying; much larger jumbo bobbin - holds 50 cubic inches of yarn; lower ratio ranges - 2 speeds - to give you excellent speed choices without changing flyer.

Features:

  • Jumbo Flyer
  • 1 Jumbo Bobbin
  • Slow Whorl (4:1 and 6:1)
  • Front Maiden with Jumbo Leather Orifice Bearing

NOTE: if you already own a Minstrel and want to add a Jumbo Kit, you must determine the manner in which your front maiden post has been installed on your wheel. If you do not have the current set-up - brass finger nut and bolt going up through the base into the maiden - you will need to do some simple woodworking to facilitate the jumbo option. Watch the video below to see how to do this. Should take about 5 minutes to do. Also, this will not fit the discontinued Mazurka wheel.

View More
$139.00 - $157.00
Description

Extend the capabilities of your Kromski Minstrel wheel by adding a Jumbo Flyer Kit. You can quickly swap out your regular flyer for the jumbo unit (and back again). Here are the benefits: flyer with very large orifice 0.70 inch opening for heavy spinning and plying; much larger jumbo bobbin - holds 50 cubic inches of yarn; lower ratio ranges - 2 speeds - to give you excellent speed choices without changing flyer.

Features:

  • Jumbo Flyer
  • 1 Jumbo Bobbin
  • Slow Whorl (4:1 and 6:1)
  • Front Maiden with Jumbo Leather Orifice Bearing

NOTE: if you already own a Minstrel and want to add a Jumbo Kit, you must determine the manner in which your front maiden post has been installed on your wheel. If you do not have the current set-up - brass finger nut and bolt going up through the base into the maiden - you will need to do some simple woodworking to facilitate the jumbo option. Watch the video below to see how to do this. Should take about 5 minutes to do. Also, this will not fit the discontinued Mazurka wheel.

Videos Hide Videos Show Videos